Test & Stimulus
Mjukvara, Elektronik, Test & Stimuli
Test system for 6 PCBs
NOW has developed a test system with beds of needles for production test of six different PCBs in a product. The system measures currents, loads and measures internal voltages, communicates via I2C and other serial interfaces, programs MCUs and FPGAs, tests motor control circuits, inputs signals to A/D converters, et c.
Test & Stimuli, Elektronik, Mekanik
19 inch rack emulator
NOW has developed hardware to two 19 inch racks, where the electronics emulates the functionality of another equipment. The racks are used where the real equipment not yet is available, or cannot be used for other reasons. The rack functions are used to evaluate both electronic functions and software.
Seven PCBs in the system were developed by NOW, plus a number of internal and external cables. PCBs and other electronics were mounted in ten EMC-safe boxes/modules, where the box fronts and backsides has engraved texts for connectors, LEDs and knobs. Both racks use 230 VAC and 100 VDC, and NOW carried through a CE marking of both racks, with the help from external testing companies.
Elektronik, Test & Stimuli
Signal generator for a vector display
A signal generator for a vector display is designed. It creates the X, Y deflection signals, and all other signals needed to communicate with the display. The PCB follows a standard to fit with previously designed PCBs for a test system in a 19″ rack.
Vision, Test & Stimuli, Mjukvara
Test of safety critical software
NOW’s vision platform AVT is used for recursive tests of safety critical software.
During the development of the software, new functions are added, and bugs are corrected. At every new release, all parts of the software must be retested to see that the functions haven’t been altered in a unwanted fashion. This is a time consuming work if a tester must watch a display to check the functions visually. NOW has developed functions to make this automatically with use of a vision system, which has resulted in lower costs, higher quality, and a more content personnel.
Mjukvara, Elektronik, Test & Stimuli
NOW has developed a test system with a bed of needles for final test and calibration of a circuit board. Supply voltage and measuring instruments are connected via the needles. A LabViewprogram perform calibration and functional tests. Test results are logged for the traceability of test data to the circuit boards.
Elektronik, Test & Stimuli, Mjukvara
Production test of air-driven hand tools
For production test of air-driven hand tools NOW has developed equipment for the measurement of torque and speed with engine braking, air flow and other parameters. Complete system deliveries have taken place at the customer. The project is based on PC based technologies, and the software is developed in Visual Basic with an Access database for control of measurement procedures and storage of read data.
Elektronik, Mjukvara, Mekanik, Test & Stimuli
Testing of mobile phones batteries
A system for testing of mobile phones batteries. A test-head with spring pins connect to the battery, and a Windows XP/2000/NT- based PC-system, with an I/O board developed by NOW, perform tests of batteries in the production line. The test data is stored in a database and a software tool developed by NOW is used to study failure types, failure rates, compare measured values to given limits, and to perform statistical analysis.
Mekanik, Elektronik, Test & Stimuli, Mjukvara
Video conversion equipment
NOW has developed a video conversion equipment which performs conversions between different video formats, for a test station used to test and develop printed circuit boards for an advanced military airborn/flight display system. The system consists of a PC and up to six video conversion boards. The PC is used to control the conversion PCBs and to translate commands coming from the operator’s computer via Ethernet, into commands that can be interpreted by the conversion boards. Everything is assembled to fit in a 19″ rack. With this equipment it is possible to test video chains without having a complete system with different cameras and sensors. The equipment converts video between analog and digital video standards and can also store, load/read, and rotate images.
Mekanik, Test & Stimuli, Mjukvara, Elektronik
NOW has developed several generations of stimulus-generation equipment, for a test station used to test and develop printed circuit boards for an advanced military airborn/flight display systems. A system contains up to three boards of the same type, where each board has three video outputs, two analogue and one digital. The analogue outputs can be synchronized to an external sync signal. The boards are controlled via buttons on the front panel, or with commands from the control computer via GPIB, IEEE-488.2. The equipment simulates the video from cameras, IR-cameras, radar and so on, and delivers several outputs of different video standard.