2019-10-22 17:07 Elektronik, Industriell automation, Försvar & Säkerhet
Interface board for a ship system
An interface board for a ship system has been designed. The card has interfaces to other units – Ethernet, USB, isolated RS422 and NMEA channels with high isolation demands. A Microchip PIC32MZEF microcontroller handles the communicationen between the different units.
2019-10-22 17:08 Flyg & Rymdteknik, Test & Stimuli, Elektronik, Mekanik
19 inch rack emulator
NOW has developed hardware to two 19 inch racks, where the electronics emulates the functionality of another equipment. The racks are used where the real equipment not yet is available, or cannot be used for other reasons. The rack functions are used to evaluate both electronic functions and software.
Seven PCBs in the system were developed by NOW, plus a number of internal and external cables. PCBs and other electronics were mounted in ten EMC-safe boxes/modules, where the box fronts and backsides has engraved texts for connectors, LEDs and knobs. Both racks use 230 VAC and 100 VDC, and NOW carried through a CE marking of both racks, with the help from external testing companies.
2019-10-22 17:16 Elektronik, Test & Stimuli, Försvar & Säkerhet, Flyg & Rymdteknik
Signal generator for a vector display
A signal generator for a vector display is designed. It creates the X, Y deflection signals, and all other signals needed to communicate with the display. The PCB follows a standard to fit with previously designed PCBs for a test system in a 19″ rack.
2019-10-22 17:16 Elektronik, Test & Stimuli, Industriell automation
A CE certification study was made on a resistance meter used for quality measurements in production. Applicable directives and standards were investigated. Part of the project was to review the current design against CE, and to propose improvements on the design.
EMC measurements in a pre-compliance lab were performed and the units were patched until they passed the CE directive.
This gave the client valuable insight for the next generation of the boards.
2019-10-22 17:17 Elektronik, Automotive, Försvar & Säkerhet
A circuit board for evaluation of IR sensors, previously developed by NOW, was redesigned into a flex-rigid PCB. The board consists of five rigid parts, with flexes in between. The board has sensitive analogue parts that receive two channels of data from the IR sensor. The data is converted to 16-bit digital values that are sent to an Altera FPGA, which sends the data to the host computer over an LVDS channel.
2019-10-22 17:18 Elektronik, Mjukvara, Industriell automation
Small interface-board for noisy environments
A small interface-board for noisy environments has been developed. It has an RS485 interface where you can control termination and bias resistors. It also has a mode for BPS (Bits-Per-Second) signalling for a very low signalling rate of critical messages in a noisy environment.
The RS485 wires may be used for for supplying power to external devices, and the board can vary the voltage and sense the power used. Thanks to these options the board can also interface a wide range of (analogue) sensors.
2019-10-22 17:18 Elektronik, Mjukvara, Industriell automation, Test & Stimuli
NOW was contacted by a firm who had problems with one or their products, a measuring device in the chemical industry. NOW went through the designs of the different curcuit boards in the unit, and introduced changes to a number of them. New PCBs were produced, and the serial production could continue. NOW also took over, and made changes in, both the microcontroller code and the PC software in the unit.
2019-10-22 17:19 Industriell automation, Test & Stimuli, Mjukvara, Elektronik
Wireless sensor unit
Development of hardware and software for a wireless sensor unit in a calibration tool. The project included Bluetooth Low Energy, laser, image sensor, USB and Lithium-ion battery.
2019-10-22 17:20 Mjukvara, Mekanik, Test & Stimuli, Industriell automation, Vision
Inspection of automatic lathing
In lathing defects may occur caused by a worn or damaged lathe steel. NOW has developed a vision system for automatic inspection of automatic lathing with high precision. Data is stored in a data base for traceability. The system can be built-in in the lathe, or mounted in a separate inspection cell.
2019-10-22 17:21 Industriell automation, Mjukvara, Elektronik
RFID communication board
NOW has developed an RFID communication board, together with antennas. The board reads both half and full duplex RFID tags. A carrier wave from a TX antenna activates the RFID tag who answers with an ID, and this answer is received by an RX antenna. Analogue filters filter the signal from the tag, and the filtered data is A/D converted in an ARM processor with digital filters. The decoded ID is then sent to the host computer. The advanced analogue and digital filters givs a reading range of 1-1.5 feet, to compare with the more normal a 2-3 inches for commercial systems.
2019-10-22 17:21 Industriell automation, Mjukvara, Elektronik
Circuit board for communication
A circuit board for communication between different interfaces has been designed. The board has an ARM processor in the STM32F series, with an SPI Flash, and the interfaces are isolated CAN, Ethernet, USB Full-Speed, RS485, general analogue I/O:s, and relay outputs.
2019-10-22 17:22 Industriell automation, Mjukvara, Elektronik
General I/O board
A small and compact general I/O board with outputs for power, analogue I/O:s for 0-20 mA or 0-28 V, digital I/O:s that withstand 28 V, CAN and IO-Link, halfbridges with up to 2.6 A current drive capacity, general serial I/O:s, and differential inputs. The board is powered with 9-28 V, and an ARM based microcontroller handles the data. The board is manufactured in large quantities, so one of the challenges was to reduce the manufacturing cost.
2019-10-22 17:23 Mekanik, Vision, Industriell automation, Test & Stimuli, Mjukvara
Test of safety critical software
NOW’s vision platform AVT is used for recursive tests of safety critical software.
During the development of the software, new functions are added, and bugs are corrected. At every new release, all parts of the software must be retested to see that the functions haven’t been altered in a unwanted fashion. This is a time consuming work if a tester must watch a display to check the functions visually. NOW has developed functions to make this automatically with use of a vision system, which has resulted in lower costs, higher quality, and a more content personnel.
2019-10-22 17:26 Industriell automation, Vision, Test & Stimuli, Mjukvara
Optical Character Verification (OCV)
NOW has developed a vision system for Optical Character Verification (OCV) . The system is used in industries where product names and text/symbols must be clearly printed on each product. This system ensures that every product that leaves the production line meets the quality requirements applicable in their respective industry.
2019-10-22 17:27 Försvar & Säkerhet, Mjukvara, Elektronik
Video distribution with GigE Vision
NOW has systematized and developed a family of printed circuit boards that distribute video over the Ethernet standard GigE Vision. The video is sent in uncompressed format and can be sent from the transmitter to a receiver or from a transmitter to multiple receivers (multicast).
Three boards have been developed with this video platform basis:
- Conversion of SDI (serial video) to GigE Vision
- Conversion from GigE Vision to DVI/HDMI and GigE Vision
- Conversion from GigE Vision to analog video
Video processing on the boards:
- Graphic generating and overlay with real-time requirements and high performance
- Rotation, scaling, interlacing and deinterlacing, etc.
The boards are FPGA-based and can be easily adapted to other video standards and formats.
2019-10-22 17:27 Vision, Mekanik, Test & Stimuli, Medicinteknik, Mjukvara, Elektronik
Monochrome CCD camera for electron microscope
Sensor: ON Semi KAI-04070
Frame rate: Max 25 fps
Pixel depth: 14 bits
Large FPGA and DDR3 memories for complex image processing in the camera
GigE Vision video streaming to the host PC
2019-10-22 17:28 Försvar & Säkerhet, Universitet & Forskning, Vision, Elektronik
Read-out electronics for high-performance stirling cooled IR-sensor
Compact electronic design
Sensitive analog electronics
2019-10-22 17:32 Mekanik, Industriell automation, Vision, Mjukvara
Inspection of production
A system has been developed for inspection of production of coaxial cables. The system continously inspects the quality of the wowen copper shield to see if there are to large openings in the braid. The system is a development of an earlier system, and comprises a standard PC, four Firewire cameras, 1024×768 pixels, lighting and optics.
2019-10-22 17:32 Mekanik, Vision, Industriell automation, Test & Stimuli, Mjukvara
Inspection of tinned cables
A vision system for inspection of tinned cables has been developed. The system looks for holes in the tinning. The cable is inspected in real time, when it passes four cameras, with the help of proprietary algorithms. The system includes a standard PC, four Firewire cameras with a 1024×768 resolution, optics and lighting.
2019-10-22 17:33 Vision, Mekanik, Test & Stimuli, Industriell automation, Mjukvara, Elektronik
Quality control in 2D and 3D (TQC)
Vision systems for difficult environments with Firewire cameras and audio analysis. The system is used for inspection/quality control in roof tile production, both in 2D and 3D. The size of the tiles is checked, and defects in the surface and edges are detected by cameras, where micrometre-thin cracks are revealed. Additionally noise analysis is used for detecting hidden cracks inside the tile.
The software is written in C++ using DirectShow and Microsoft Visual Studio.
The hardware consists of a PC with I/O-cards and external PLC and photoelectric sensors, and is built with Bosch strut profiles around the conveyor belt.
The system is fully parameter-controlled and stores the statistics. The user can choose to save images and sound recordings for a follow-up. The system has a variety of custom variants delivered to the Swedish and Danish tileworks for different kinds of clay and concrete tiles.
To view one of our projects Click here!
2019-10-22 17:33 Mjukvara, Industriell automation, Elektronik, Test & Stimuli, Mekanik
NOW has developed a test system with a bed of needles for final test and calibration of a circuit board. Supply voltage and measuring instruments are connected via the needles. A LabViewprogram perform calibration and functional tests. Test results are logged for the traceability of test data to the circuit boards.
2019-10-22 17:35 Mjukvara, Universitet & Forskning, Medicinteknik
Analysis of medical data in Matlab
A tool in Matlab to adapt features to the medical measurement data from experiments with luminescence and fluorescence.
2019-10-22 17:35 Elektronik, Mjukvara, Industriell automation, Test & Stimuli, Universitet & Forskning
Analysis of signals from RFID “tags” with Matlab
A tool in Matlab to filter and analyze RFID data has been used to optimize the hardware where the signals are decoded.
2019-10-22 17:36 Elektronik, Mjukvara, Test & Stimuli, Universitet & Forskning
Development of analog and digital precision electronics for a measurement instrument. The system includes up to twelve 24-bit measurement channels, an Altera Cyclone II FPGA for collecting measurement data, GPS, Ethernet, USB and an LCD. The system is controlled by an Atmel ARM9263 CPU with a Linux operating system, and NOW also has developed drivers and VHDL code for the FPGA.
2019-10-22 17:36 Elektronik, Mjukvara, Universitet & Forskning, Automotive
Simulation of an IR camera in Matlab
A tool in Matlab which is used for calibration and simulation an IR camera . You can also measure 3D noise in videos, which is a good way to measure the IR sensor quality.
2019-10-22 17:37 Mjukvara, Test & Stimuli, Mekanik, Vision, Industriell automation
Inspection of bending
Within a very short time frame, NOW developed a vision system for inspection of bending. The system with two Firewire cameras, lighting, control electronics and PC software, automatically inspected the bending of an tinned component pin. If copper was visible, the component was not to be used. The system looked for the colour of copper, which was very effective. The customer could easily change parameters via the PC user interface, to change for example how much copper that was allowed. Statistics were saved in a database tool.
2019-10-22 17:38 Elektronik, Mjukvara, Medicinteknik, Industriell automation
Controller board with multiple interfaces for DC motors, stepper motors, encoders, and position and photo sensors. The board is controlled by a PC-104 module via an ISA-bus, and includes an Altera Cyclone III FPGA. The board also supports automatic electronic monitoring of the motor current, board voltages and temperature, in order to allow emergency shutdown without the help of software (handled by the FPGA).
2019-10-22 17:40 Elektronik, Mjukvara, Industriell automation
NOW has developed two circuit boards for the evaluation of data communication over a two-wire, superimposed on the supply voltage. The data transmitting uses different speeds and methods, in very noisy environments.
2019-10-22 17:47 Elektronik, Industriell automation
Motor Driver PCB
One older relay armed motor driver PCB is replaced by a semiconductor one. Requirements from the customer was full compatibility regarding physical size, hole pattern and interface to the system in general. The design includes modern MOS FETs and readily available components to ensure a long-term perspective in the manufacturing process.
2019-10-22 17:47 Elektronik, Mjukvara, Vision, Startups & Prototyper
Professional film camera with HD resolution
NOW has participated in the development of a professional film camera with full HD resolution (1920×1080) and 12-bit color depth. In the camera there are seven different PCBs, and one more in a pluggable memory card.
2019-10-22 17:48 Mjukvara, Test & Stimuli, Vision, Industriell automation
Vision application in a production line
A vision application to inspect a mechanical detail in a production line has been designed. The application looks for defects, where for example an edge may have been damaged.
2019-10-22 17:49 Mekanik, Startups & Prototyper, Mjukvara, Elektronik
Integrator for MEMS sensors
An integrator specially developed for MEMS sensors was included in a preliminary study in order to find a replacement for conventional solutions. The undertaking included schematics and internal PCB CAD and experiments.
2019-10-22 17:50 Försvar & Säkerhet, Mjukvara, Elektronik
RF circuit board
Designed parts of an RF circuit board designed for a radar environment simulation 0.5 to 2 GHz. The PCB contains 2 GHz PLLs with -150dBc/Hz @ 1MHz in phase noise, and real-time control of the DDS using a Xilinx Virtex-4 FPGA in an ISE environment.
2019-10-22 17:50 Startups & Prototyper, Mjukvara, Elektronik
Data storage board
Development of hardware for a data storage board in ship systems. The board is controlled by an Atmel ARM9263 processor, and has a 10/100 Ethernet channel, USB and NMEA interfaces. The board is designed to handle extended temperature range.
2019-10-22 17:51 Automotive, Mjukvara, Elektronik
Modular data collection
Development of hardware and software for video and audio collection systems in ships. The assignment involved multiple projects, since the system is modular with a CPU board as a base and expansion boards for each subproject. For picture and sound management we used an Analog Devices Blackfin DSP (programmed in C, C + + and assembler) and an Altera Cyclone II FPGA (programmed in VHDL). The system receives and compresses video and audio to JPEG and MPEG1 Layer 2 in real time.
2019-10-22 17:52 Mekanik, Test & Stimuli, Försvar & Säkerhet, Mjukvara, Elektronik
Data collection (HDLC, synchro-digital)
Redesign of a data collection device for weapons systems calibration. The device has both analog and digital (HDLC, synchro-digital) inputs with various dedicated interfaces. An Altera FPGA manages the data flow from the inputs to the USB port.
2019-10-24 11:16 Automotive, Mjukvara, Elektronik
Collecting data from GPS
PCB design for collecting data from GPS etc in ship systems. The circuit board follows the customer’s compact build system, and can operate either as a slave or master. The board receives six NMEA channels, has two RS-485 channels and 10/100 Ethernet. The board is controlled by an ARM9 processor and an Altera Cyclone II FPGA.
2019-10-24 11:17 Flyg & Rymdteknik, Industriell automation, Försvar & Säkerhet, Mekanik, Medicinteknik, Startups & Prototyper, Automotive, Universitet & Forskning, Test & Stimuli, Elektronik
NOW helped with addressing electrical safety and EMC-related problems in a measuring instrument for industrial processes. The customer’s external PCB layout resource received directives from NOW.
2019-10-24 11:19 Startups & Prototyper, Automotive, Elektronik
Feasability studies for a robust fire alarm, for use in for example an engine house, have been made. The product was based upon two-wire communication and had electronics for up to +150 degrees Celsius use.
2019-10-24 11:19 Medicinteknik, Elektronik
High-voltage AC/DC power supply
NOW has developed a high-voltage AC/DC power supply. The unit is used to charge large capacitors, who are part of a medical system.
2019-10-24 11:20 Startups & Prototyper, Industriell automation, Elektronik
Inductive coupling to a power cable
Feasibility study where the ability to drive electronics via the inductive coupling to a power cable were examined. The difficulty lay in that the power cable would run through the electronic unit, and therefore the “transformer” winding consisted of only one lap. NOW concluded that the project was feasible, and a prototype was displayed for the customer.
2019-10-24 11:23 Mekanik, Industriell automation, Universitet & Forskning, Vision, Mjukvara, Test & Stimuli, Elektronik
Vision systems for quality control of paper paths
NOW has developed a vision systems for quality control of paper paths in the paper industry. The system detects splicing, creases, cracks, holes, et cetera – everything that is needed to facilitate the production, make it more efficient, more profitable and ensure quality.
2019-10-24 11:24 Elektronik, Industriell automation, Startups & Prototyper
Inverter for inductive heating
NOW has developed a 6 kW inverter for inductive heating. In the mission included simulation and calculations, design, schematic and realization, as well as prototyping and test.
2019-10-24 11:24 Mjukvara, Vision, Industriell automation
Distribution of MPEG4 video
Distribution of MPEG4 video over the network for the monitoring of the process. Server/client modules converts DirectShow technology, and can easily be integrated in VisualStudio.net-environment.
2019-10-24 11:25 Mjukvara, Elektronik, Test & Stimuli, Mekanik, Vision, Försvar & Säkerhet, Flyg & Rymdteknik
A complete CCD camera for military use, including mechanics, electronics and software, has been developed by NOW. The camera records a 14-bit 2048×2048 video at 160 Msamples/s. A lossless image compression with a proprietary algorithm reduces the amount of data, which is then sent over a Gigabit Ethernet link to the host computer. Basic image processing and control is done in an Altera Cyclone II FPGA. The camera is of a kinematic theodolite type.
2019-10-24 11:25 Elektronik, Mjukvara, Försvar & Säkerhet
Jitter attenuator to a military communication link
Development of a jitter attenuator to a military communication link. NOW developed the analog and digital electronics. Sampling, data reconstruction and digital phase-lock (clock recovery) was made in an Altera CPLD.
2019-10-24 11:26 Elektronik, Mjukvara, Mekanik, Automotive, Försvar & Säkerhet
Embedded 8.4@ TFT display with software, mechanics and image processing. Used in military operator systems under harsh environments for displaying camera video, with crosshairs and OSD (On Screen Display). Includes a microprocessor for system control and an Altera Cyclon II FPGA for image processing and display control. The job included the development of the full system: the display itself, mechanics, electronics and programming.
2019-10-24 11:27 Mjukvara, Industriell automation
Control and regulation programs
NOW has developed control and regulation programs to hydrally controlled hand tools for crimping terminals. A PIC processor was programmed in assembler.
2019-10-24 11:27 Elektronik, Medicinteknik, Startups & Prototyper
Design of an analogue telephone (PSTN). The device is included in an audio/visual aid for persons with hearing loss. The phone is connected to the telephone network, and also (via galvanically isolated inputs and outputs) to a PC via a 3.5 mm jack plug.
2019-10-24 11:28 Elektronik, Mekanik, Försvar & Säkerhet, Mjukvara
Controller board for an EL display
NOW has developed a controller board for an EL display. Among other things clock signals to the display are created, and the board includes a DC/DC converter 200V.
2019-10-24 11:28 Elektronik, Mjukvara, Industriell automation
Construction of a flow meter. The instrument measures the flow with the pressure-differential-method (linear plot). The user reads the flow on a CCD-display. The instrument is controlled by a PIC processor, 4-20mA output, as well as pulse and voltage outputs.
2019-10-24 11:29 Elektronik, Medicinteknik, Mjukvara
Development of a video mixer that mixes images from two cameras and a computer – a tool for the visually impaired. The unit provides contrast enhancement and artificial colors in real time. The electronics consists of two circuit boards, and everything is controlled by an Altera Cyclone I FPGA, programmed in VHDL. The FPGA has a built-in soft NIOS processor, which is programmed in C.
2019-10-24 11:30 Elektronik, Startups & Prototyper, Automotive, Mjukvara
NOW participated in the development of a display for car dashboards. Requirements specification, selection of a custom made CMOS display supplier, manufacturing of prototypes, verification, testing equipment and manufacturing, were included in the commission.
2019-10-24 11:30 Startups & Prototyper, Test & Stimuli, Elektronik
Integrator for laboratory use
Design of an integrator for laboratory use. The instrument integrates pulses down to 5 ns, this demands a high performance on both the analog components and the ultra-fast ECL logic.
2019-10-24 11:31 Försvar & Säkerhet, Automotive, Mjukvara, Elektronik
A controller board for a 30 inch DVI flat panel. An Atmel microprocessor manages the display control and serial port communication. The system is situated at an operator seat with military requirements.
2019-10-24 11:31 Försvar & Säkerhet, Mekanik, Test & Stimuli, Flyg & Rymdteknik, Mjukvara, Elektronik
NOW has contributed more than 20 man-years at a customers with developing of an advanced display system, including specifications, analog and digital electronics, FPGA and ASIC methodology and coding, real-time programming in ADA and C ++ , verification, documentation, etc.
2019-10-24 11:32 Industriell automation, Försvar & Säkerhet, Medicinteknik, Mekanik, Automotive, Flyg & Rymdteknik, Vision, Test & Stimuli, Mjukvara, Elektronik
Vision system for inspecting dashboards
NOW has developed a vision system for inspecting dashboards. The system is built using DirectShow and Microsoft Visual Studio .NET 2003. Cameras deliver images that are handled in real time. Possible parameters to inspect are: colour, intensity, shape, symbols, segment displays, LCD displays, indicator positions and indicator needle movement. The application encapsulates a scripting language that is easily configured through a graphichal interface. Optional controls/commands are carried out in sequence. The system communicates with the client’s control system via TCP/IP.
2019-10-24 11:32 Universitet & Forskning, Mekanik, Vision, Industriell automation, Test & Stimuli, Mjukvara, Elektronik
Measurement of a pendulum
A vision application for measurement of a pendulum. The pendulum is affected by swirls of molten steel which occur when draining the steel.
2019-10-24 11:33 Industriell automation, Vision, Mjukvara
Vision system for plastic crates
A vision system for plastic crates, where the position of the handles is checked in production. The crates can’t be stacked if the handle is in the wrong position. An analogue camera, lighting and image processing algorithms were part of the commission.
2019-10-24 11:34 Industriell automation, Test & Stimuli, Mjukvara, Elektronik
Temperature regulation of heating jackets used for example in the semiconductor industry. Control boards with temperature measurement using thermocouples (K elements) and PID regulation of the temperature. The setpoint and control parameters are set via a two-wire interface with combined CAN-link and power supply. Continuous monitoring of the actual temperature and any error conditions. An circuit from NEC was used, programmed in C. The board is compliant with IEC60065 (EN60065).
2019-10-24 11:35 Flyg & Rymdteknik, Vision, Mjukvara
Integration of video playback/recording functionality in an airborne system. Server and multi-client viewing of MPEG-4 encoded video with system logging. On the client-side DirectShow functionality in Windows XP (CPCI) is used. Simultaneous viewing and recording of 4 channels (NTSC/PAL).
2019-10-24 11:35 Startups & Prototyper, Universitet & Forskning, Test & Stimuli, Elektronik
Evaluation of analogue electronics for a temperature sensor -40 to +100 degrees, 4-20 mA.
2019-10-24 11:36 Mekanik, Automotive, Elektronik
NOW has simulated and implemented EMC improvements on an infrared camera to meet the requirements of the automotive environment. Improvements were made primarily on the link between the controller and the camera, but also on the internal parts of the camera, such as DC/DC converters, etc.
2019-10-24 11:36 Flyg & Rymdteknik, Försvar & Säkerhet, Mjukvara, Elektronik
Power supply board
NOW has served as specialists help with a power supply board for a device in a German air fighter. The more than three man-years long assignment included studies, specifications, five PCBs, DC/DC and AC/DC converters, microcontrollers, real-time software and documentation.
2019-10-24 11:37 Mjukvara, Mekanik, Elektronik, Försvar & Säkerhet, Automotive
Military memory module
Development of a portable military memory module and its holder, for use in a tank. The mechanical design is very robust in order to withstand the environment of military combat vehicles. The electrical interface to the memory module is a CAN-bus. The module is based on a Philips 87C592 microcontroller and flash memory. NOW has also mass-produced the memory module and its holder during a five year period.
2019-10-24 11:38 Elektronik, Industriell automation, Test & Stimuli, Mjukvara
Production test of air-driven hand tools
For production test of air-driven hand tools NOW has developed equipment for the measurement of torque and speed with engine braking, air flow and other parameters. Complete system deliveries have taken place at the customer. The project is based on PC based technologies, and the software is developed in Visual Basic with an Access database for control of measurement procedures and storage of read data.
2019-10-24 11:38 Elektronik, Mjukvara, Industriell automation, Startups & Prototyper
NOW has developed an I/O board with several interfaces to solenoids, rotary encoders, linear position transducers and more. The board is controlled by a PC104 bus (ISA), and contains an Altera Cyclon-FPGA with integrated soft NIOS processor. The board also has a number of PWM-controlled H-bridges, serial interfaces with multiple long-distance nodes and a robust digital I/O with error handling.
2019-10-24 11:39 Elektronik, Mjukvara, Mekanik, Vision, Industriell automation
Checking of labels
A system for reading and checking of labels. A line-scan camera scans the label as it passes by, and a computer with a frame grabber board, a control board and image processing software interprets the image. The printing quality is checked, and the serial number is read and stored.
2019-10-24 11:39 Elektronik, Mjukvara, Mekanik, Test & Stimuli, Industriell automation
Testing of mobile phones batteries
A system for testing of mobile phones batteries. A test-head with spring pins connect to the battery, and a Windows XP/2000/NT- based PC-system, with an I/O board developed by NOW, perform tests of batteries in the production line. The test data is stored in a database and a software tool developed by NOW is used to study failure types, failure rates, compare measured values to given limits, and to perform statistical analysis.
2019-10-24 11:40 Elektronik, Mjukvara, Vision, Industriell automation
NOW has designed all the electronics to a line-scan camera, four circuit boards. The CCD has eight outputs to eight A/D converters, each of these has a 30 MHz data rate, which gives 160 Mpixel/sec. The electronics includes an Altera Cyclone II FPGA programmed in the Quartus environment, and analog drive electronics for the CCD, a 2k x 96 TDI CCD. In order to get the best quality of the data from the CCD it must be controlled with precise analogue signals, with special rise and fall times, and signals therefore has a resolution of nanoseconds.
2019-10-24 11:41 Elektronik, Mjukvara, Industriell automation
Control PCB for sputtering aggregates
A control PCB for sputtering aggregates with monitoring of current, voltage, power and energy. The PCB contains a Spartan FPGA from Xilinx, a Rabbit microprocessor, and analog interfaces for accurate measurements and control in a very disturbed environment. A number of serial interfaces, such as Profibus. Control tables are downloaded for control of sputtering course and other selectable properties.
2019-10-24 11:41 Elektronik, Mjukvara, Vision, Automotive
Frame grabber/image processor
NOW has developed an image processor for traffic tolls. It is a PCI board with two camera inputs for optical fiber. The design included PCBs and VHDL code for “soft” parallel processing in FPGA used for image processing in real time, and development of drivers for Linux and Windows.
2019-10-24 11:42 Elektronik, Mjukvara, Industriell automation
Programming of FPGAs
Programming of FPGAs in the Xilinx 4000 series at the customer premises. The FPGAs were used for motor control and signal processing, etc. The circuits were programmed in VHDL using the tools Modelsim and Xilinx ICE.
2019-10-24 11:47 Elektronik, Mjukvara, Mekanik, Vision, Industriell automation
Measuring cooling channels
NOW has developed vision functions for integration into the customer’s machine for measuring cooling channels etc. in tool steel. Angle and position were measured. The delivery included DLL files for integration into the customer’s application, lighting, optics, CCD-camera, camera casing, etc.
2019-10-24 11:48 Elektronik, Mjukvara, Mekanik, Vision, Industriell automation
Frame grabber (Linux-based)
NOW has developed a Linux-based frame grabber for a measurement application. The frame grabber has two camera inputs with flexible triggering, and it has Ethernet connection. A specially developed card controls the lighting. The board has been kept alive with component updates to new versions, and has now been produced in various forms for many years.
2019-10-24 11:49 Elektronik, Mjukvara, Industriell automation
Photodiode detectors in the NIR range
For personal protection in an assembly machine NOW has developed electronics working in the NIR range. Ten parallel channels of transmitters/receivers, photodiode detectors with extreme dynamics, including optics, analogue and digital electronics.
2019-10-24 11:49 Mjukvara, Vision, Industriell automation
Measuring of reference marks
NOW has developed algorithms for extremely accurate (30 nm) measuring of reference marks in laser drawing machines. The reference marks have several specially designed appearances. NOW started from scanned images and optimized the image analysis algorithms to 1/20 pixel accuracy. The algorithms were implemented in C++, and executed under Unix, integrated in the client’s machine.
2019-10-24 11:51 Elektronik, Industriell automation, Vision, Mjukvara
CD inspection system
NOW has developed an CD inspection system, to be integrated in a machine for manufacturing CDs. NOW made a market research and selection of the fast CCD line scan camera which loads an image of the CD-writer when it spins one revolution. The image is sent to one of NOWs developed frame grabber boards, where some image processing is performed in hardware. Afterwards the image is processed with software vision algorithms, developed by NOW. After that the image is searched for surface defects, etc. Over 400 machines were manufactured using this equipment.
2019-10-24 11:51 Flyg & Rymdteknik, Mekanik, Försvar & Säkerhet, Elektronik, Test & Stimuli, Mjukvara
Video conversion equipment
NOW has developed a video conversion equipment which performs conversions between different video formats, for a test station used to test and develop printed circuit boards for an advanced military airborn/flight display system. The system consists of a PC and up to six video conversion boards. The PC is used to control the conversion PCBs and to translate commands coming from the operator’s computer via Ethernet, into commands that can be interpreted by the conversion boards. Everything is assembled to fit in a 19″ rack. With this equipment it is possible to test video chains without having a complete system with different cameras and sensors. The equipment converts video between analog and digital video standards and can also store, load/read, and rotate images.
2019-10-24 11:51 Mjukvara, Vision, Industriell automation
NOW has developed a very cost effective vision function for integration into the customer’s plate bending machine. The vision algorithms are based upon NOW’s vision library, and they find and align to reference marks. Each machine has three CMOS USB cameras.
2019-10-24 11:52 Industriell automation, Mjukvara, Elektronik
PCBs to mounting machine
NOW has worked with a number of PCBs to an automatic mounting machine.
The cooperation with the customer started in the eighties (before Windows, in a time when most electronic components still were hole mounted), and is still going on. The first board generated a 80×22 (characters x rows) monochrome/colour PC-screen, with video and graphics overlay. The board was also used as an interface between the old boards in the machine, and the new world of PC-based PCBs. After this first board other boards followed, for example for controlling stepper motors.
2019-10-24 11:53 Försvar & Säkerhet, Mekanik, Test & Stimuli, Flyg & Rymdteknik, Mjukvara, Elektronik
NOW has developed several generations of stimulus-generation equipment, for a test station used to test and develop printed circuit boards for an advanced military airborn/flight display systems. A system contains up to three boards of the same type, where each board has three video outputs, two analogue and one digital. The analogue outputs can be synchronized to an external sync signal. The boards are controlled via buttons on the front panel, or with commands from the control computer via GPIB, IEEE-488.2. The equipment simulates the video from cameras, IR-cameras, radar and so on, and delivers several outputs of different video standard.
2019-10-24 11:53 Startups & Prototyper, Universitet & Forskning, Mjukvara, Elektronik
CCD detector to spectrometer
NOW has participated in the development of a CCD detector to an Echelle-spectrometer, with drive electronics to a Mpixel CCD, clock generation to the chip, 16-bit A/D and frame grabber, Peltier-cooling with regulation.